RUBBER HOSE BENDS 45°

RECOMMENDED FOR:

A multipurpose hard wall 45° hose bend for both suction and delivery of slurry or waterborne abrasives.
Incorporating a high tensile wire helix embedded into the carcass of the preformed bend.
The bend has a 3:1 safety factor on the working pressure.
For sizes greater than 600nb, contact our sales department

LinerLINER:
Red Trucotex NR

ReinforcingREINFORCING:
Multiple plies of Polyester fabric plus high tensile wire helix

CoverCOVER:
NR/SBR

STANDARD RADII:
Standard bend radii is 3 x the bend diameter, for other bend application enquiries please contact our sales department

END FITTINGS:
Available with D-ring or Built-in flanges

TemperatureRECOMMENDED TEMPERATURE RANGE:
-20°C to 80°C

Call Today: +27 11 839 2370

 
Part Nominal Size Actual Hose Liner Bend Vacuum Approximate mass
number bore inch mm OD thickness radii Kpa Including flanges (kg)
8145 080 80 3 76.2 109 6 230 90 8.0
8145 100 100 4 101.6 137 6 310 90 9.9
8145 125 125 5 127 162 6 380 90 13.9
8145 150 150 6 152.4 189 6 460 90 19.8
8145 200 200 8 203.2 240 6 610 90 27.3
8145 250 250 10 254 289 6 760 90 36.7
8145 300 300 12 304.8 341 9 920 90 51.0
8145 350 350 14 355.6 396 9 1070 80 74.8
8145 400 400 16 406.4 464 9 1220 80 99.2
8145 450 450 18 457.2 516 9 1370 80 126.5
8145 500 500 20 508 567 9 1524 70 154.1
8145 600 600 24 609.6 678 9 1830 70 230.0

Our Large bore hose range also includes:

Orange Arrow Right

Composite Hoses

Orange Arrow Right

Dredger Hoses

Orange Arrow Right

Pulp and Slurry Hoses