A multipurpose hard wall hose for both suction and delivery of slurry or waterborne abrasives.
Incorporating a high tensile wire helix embedded into the carcass of the hose preventing the hose from kinking.
The hose has a 3:1 safety factor on the working pressure.
For sizes greater
than 600nb, contact our sales department
LINER:
Red Trucotex NR
REINFORCING:
Multiple cords of Polyester cord plus high tensile wire helix
COVER:
NR/SBR
RECOMMENDED TEMPERATURE RANGE:
-20°C to 80°C
STANDARD LENGTH:
Maximum 20 meter lengths
END FITTINGS:
Available with plain ends or cuffed, fixed or floating flanges built-in, D-ring or Double laminated flanges
Part | Nominal | Size Actual | Hose | Liner | Minimum | Vacuum | Hose | |
---|---|---|---|---|---|---|---|---|
number | bore | inch | mm | OD | thickness | bend radius | Kpa | mass kg/m |
8100 040 | 40 | 1½ | 38.1 | 65 | 6 | 380 | 90 | 2.7 |
8100 050 | 50 | 2 | 50.8 | 78 | 6 | 510 | 90 | 3.3 |
8100 065 | 65 | 2½ | 63.5 | 91 | 6 | 640 | 90 | 4.1 |
8100 080 | 80 | 3 | 76.2 | 107 | 6 | 760 | 90 | 5.9 |
8100 100 | 100 | 4 | 101.6 | 135 | 6 | 1020 | 90 | 8.1 |
8100 125 | 125 | 5 | 127 | 160 | 6 | 1280 | 90 | 9.9 |
8100 150 | 150 | 6 | 152.4 | 187 | 6 | 1520 | 90 | 12.0 |
8100 178 | 180 | 7 | 178 | 213 | 6 | 1780 | 90 | 13.8 |
8100 200 | 200 | 8 | 203.2 | 238 | 6 | 2030 | 90 | 15.6 |
8100 250 | 250 | 10 | 254 | 285 | 6 | 2540 | 90 | 18.0 |
8100 300 | 300 | 12 | 304.8 | 335 | 6 | 3054 | 90 | 21.3 |
8100 350 | 350 | 14 | 355.6 | 390 | 6 | 3550 | 80 | 25.2 |
8100 400 | 400 | 16 | 406.4 | 456 | 9 | 4060 | 80 | 38.1 |
8100 450 | 450 | 18 | 457.2 | 508 | 9 | 4570 | 80 | 46.1 |
8100 500 | 500 | 20 | 508 | 559 | 9 | 5080 | 70 | 51.5 |
8100 560 | 550 | 22 | 558.8 | 616 | 9 | 5580 | 70 | 57.4 |
8100 600 | 600 | 24 | 609.6 | 667 | 9 | 6100 | 70 | 80.1 |
Composite Hoses
Dredger Hoses
Pulp and Slurry Hoses
Send us your requirements using the STAMPED acronym:
Size: The length and inside diameter?
Temperature: Temperature of the medium transported?
Application: What is the purpose of the hose?
Material: What product will be conveyed through the hose?
Pressure: The working pressure and the required safety margin?
Ends: Are couplings required, and if so a detailed specification?
Delivery: When is it needed?