Click here to go to the home page Click here to go to the enquiry page click here to contact us 011 839 2370
  Supplying rubber products since 1892
 
green square About Us Blue square Contact Us Red square News Red square Downloads
 
   
 
  
 

Victaulic Grooved Joining Systems

As an official African distributor, Truco supplies the full range of Victaulic grooved mechanical pipe joining products.

Victaulic Grooved Systems:

  • Rigid and flexible operation couplings available
  • Reduced noise and vibration
  • Seismic stress absorption and easy alignment
  • Require 45% less man-hours over welding
  • Reduce material handing by 30 to 70%
  • Reduce energy consumption
  • Eliminate costly fire watch and hazardous fumes and flames

This range of Victaulic grooved joining systems includes a range of couplings, valves, fittings, and accessories.

 
Contact Truco for
Victaulic products now
available throughout Africa
     Name *
 
     Company *
 
     Location (Country/Province): *
 
     Email *
 
     Tel *
 
     Products of interest *
 
     Comments *
 
   
Get a new challenge
 
 
 
  grey line  
 

Grooved End Couplings:

Standard Flexible Coupling

Flexible Grooved Coupling

Zero-Flex™ Rigid Coupling

QuickVic™ Flexible Coupling

Standard Flexible Coupling

  • Order number: Style 77
  • Cross-ribbed construction designed for higher working pressures
  • Provides flexibility for expansion, contraction and deflection
  • Sizes ranging from
    20 to 600 mm
  • Pressure rated up to 6 900 kPa

Flexible Grooved Coupling

  • Order number: Style 75
  • Designed for use where moderate pressures are expected and weight considerations are a factor
  • 50% lighter than Style 77 couplings
  • Housings cast in two identical pieces
  • Sizes ranging from
    25 to 304.8 mm
  • Pressure rated up to 3 450 kPa

Zero-Flex™ Rigid Coupling

  • Order number: Style 07
  • Angled pad design adjusts to standard pipe tolerances to positively clamp the pipe
  • Resists flexural and torsional loads
  • Sizes ranging from
    25 to 600 mm
  • Pressure rated up to 5 170 kPa

QuickVic™ Flexible Coupling

  • Order number: Style 177
  • Installation-ready™ and joins standard cut and roll grooved steel pipes
  • No loose parts
  • Sizes ranging from
    50 to 200 mm
  • Pressure rated up to 2 065 kPa
grey line 
QuickVic™ Rigid Coupling Snap-Joint™ Coupling Reducing Coupling Outlet Coupling

QuickVic™ Rigid Coupling

  • Order number: Style 107
  • QuickVic™ couplings are assembled onto the pipe without disassembling the bolts, nuts and housings
  • Sizes ranging from 50 to 200 mm
  • Pressure rated up to 4000kPa

Snap-Joint™ Coupling

  • Order number: Style 78
  • Designed for quick disconnect service
  • Sizes ranging from 25 to 200 mm (with steel link handles)
  • Pressure rated up to 2 065 kPa

Reducing Coupling

  • Order number: Style 750
  • Eliminates need for two couplings and a reducing fitting
  • Direct reduction on the piping run
  • Specialised reducing gasket for pressure responsive sealing
  • Sizes ranging from 50 X 25 mm to 200 X 150 mm
  • Pressure rated up to 3 450 kPa

Outlet Coupling

  • Order number: Style 72
  • Designed to seal on the joined pipe ends and in the neck of the outlet
  • Serves dual purpose as a coupling and an outlet
  • Sizes ranging from 40 X 15 mm to 150 X 50 mm
  • Pressure rated up to 3 450 kPa
grey line 
Vic-Flange Coupling Vic-Flange Coupling Mechanical-T Cross Outlet Vic-Let Strapless Outlet

Vic-Flange Coupling

  • Order number: Style 741
  • Directly incorporates DIN PN10/16 & ANSI Class 125 or Class 150 flanged components into a grooved system
  • Compatible with raised-face and flat-face flange
  • Sizes ranging from 50 to 600 mm
  • Pressure rated up to 2 065 kPa

Vic-Flange Coupling

  • Order number: Style 743
  • Allows direct connection of ANSI Class 300 flanged components into a grooved system
  • Compatible with raised-face and flat-face flange
  • Sizes ranging from 50 to 300 mm
  • Pressure rated up to 4 960 kPa

Mechanical-T Cross Outlet

  • Order number: Style 920
  • Provides a direct outlet at any pipe location where a hole can be cut and requires no welding
  • A pressure responsive gasket provides the perfect seal
  • Sizes ranging from 50 to 200 mm
  • Pressure rated up to 2 750 kPa

Vic-Let Strapless Outlet

  • Order number: Style 923
  • Provides a fast, easy pipe outlet without the need for a strap or lower housing to wrap around the pipe
  • Standard & schedule 10-40 wall pipe for sizes 100-200mm & 250mm and larger Pressure rated up to 2 065 kPa
grey line 
Rigid Coupling Duplex Rigid Coupling Flexible Coupling Duplex Flexible Coupling

Rigid Coupling

  • Order number: Style 489
  • CF8M stainless steel for corrosion resistance and strength
  • Sizes ranging from 40 to 300 mm
  • Pressure rated up to 4 136 kPa

Duplex Rigid Coupling

  • Order number: Style 489 DX
  • Reduces linear or angular movement
  • Ideal for valve connections
  • Sizes ranging from 50 to 300 mm
  • Pressure rated up to 8 273 kPa

Flexible Coupling

  • Order number: Style 77S
  • Designed to provide a rugged, flexible joint for stainless steel systems
  • Sizes ranging from 20 to 450 mm
  • Pressure rated up to 5 715 kPa

Duplex Flexible Coupling

  • Order number: Style 77DX
  • Designed to provide a durable mechanical joint for roll or cut grooved end duplex/super duplex stainless steel piping systems
  • Sizes ranging from 20 to 100 mm
grey line 
Flexible Coupling Duplex Flexible Coupling AGS Rigid Coupling AGS Flexible Coupling

Flexible Coupling

  • Order number: Style 475
  • Lightweight flexible coupling for stainless steel systems
  • Accommodates expansion, contraction and/or deflection
  • Sizes ranging from 25 to 165 mm
  • Pressure rated up to 5 175 kPa

Duplex Flexible Coupling

  • Order number: Style 475DX
  • Designed to provide a durable mechanical joint for roll or cut grooved end duplex/super duplex stainless steel piping systems
  • Sizes ranging from 25 to 100 mm

AGS Rigid Coupling

  • Order number: Style W07
  • AGS couplings are provided with a Flush Seal gasket
  • Sizes ranging from 350 to 1 250 mm
  • Pressure rated up to 2500kPa

AGS Flexible Coupling

  • Order number: Style W77
  • Provides limited linear angular movement to accommodate thermal pipe growth, vibration attenuation, seismic and other design considerations that require flexibility
  • Sizes ranging from 350 to 1 525mm
  • Pressure rated up to 2500 kPa
Back to Top
grey line 
 
 

Grooved End Valves:

Vic-300® MasterSeal™ Butterfly Valve

Vic-Ball Valve

Butterfly Valve

Vic-300® MasterSeal™ Butterfly Valve

  • Order number: Style 761
  • For bi-directional, dead end services to full working pressure
  • Valve is provided with either 10-position handle, lever lock or gear operator
  • Sizes ranging from 50 to 600 mm
  • Pressure rated up to 2 068 kPa

Vic-Ball® Valve

  • Order number: Style 726
  • High-pressure standard port ball valve with grooved ends
  • Features floating ball for lower torque requirements
  • Sizes ranging from 40 to 150 mm
  • Pressure rated up to 6900kPa

Butterfly Valve

  • Order number: Style 700
  • Designed for positive shut-off and dead-end service
  • Grooved end body is full rubber lined
  • Narrow disc design for low pressure drop performance
  • Sizes ranging from 40 to 150 mm
  • Pressure rated up to 1400 kPa
grey line 
Vic-Check® Valve Swinger® Swing Check Valve Swing Check Valve

Vic-Check® Valve

  • Order number: Style 716
  • Combines high pressure capabilities with low pressure drop performance
  • Grooved end design permits fast, easy installation
  • Sizes ranging from 65 to 600 mm
  • Pressure rated up to 2 068 kPa

Swinger® Swing Check Valve

  • Order number: Style 712
  • Designed for use with standard Victaulic grooved fittings and couplings
  • Large closure access bonnet permits easy internal coating for corrosive services
  • Sizes ranging from 50 to 100 mm
  • Pressure rated up to 2 068 kPa

Swinger® Swing Check Valve

  • Order number: Style 713
  • Designed for use with standard Victaulic grooved fittings and couplings
  • Large closure access bonnet permits easy internal coating for corrosive services
  • Sizes ranging from 50 to 100 mm
  • Pressure rated up to 6 900 kPa
Back to Top
grey line 
 
 

Grooved End Fittings:

Range includes: Elbows, Tees, Crosses, Wyes, Laterals, Reducers, Adapters, Nipples, Caps and Plugs

  • All fittings supplied with grooves or shoulders for fast installation
  • Fittings available for 20 to 609 mm
  • For AGS sizes 355 to 1 524 mm

45° Elbow

22.5° Elbow

11.25° Elbow

No. 10
90° Elbow

No. 11
45° Elbow

No. 12
22.5° Elbow

No. 13
11.25° Elbow

grey line 
Equal Tee Reducing Tee Tee with Threaded Branch  

No. 20
Equal Tee

No. 25
Reducing Tee

No. 29
Tee with Threaded Branch

 
grey line 
Adaptor Nipple Groove x Beveled  

No. 40
Adaptor Nipple
Groove X BSP or NPT

No. 42
Adaptor Nipple
Groove X Beveled

No. 44
Adaptor Nipple
Groove X Shouldered

No. 48
Hose Nipple

grey line 
Concentric Reducer Eccentric Reducer End Cap  

No. 50
Concentric Reducer

No. 51
Eccentric Reducer

No. 60
End Cap

 
Back to Top
grey line 
Stainless Steel Grooved End Fittings :
90° Elbow 45° Elbow 22.5° Elbow 11.25° Elbow

No. 410
90° Elbow

No. 411
45° Elbow

No. 412
22.5° Elbow

No. 413
11.25° Elbow

grey line 
Equal Tee daptor Nipple Concentric Reducer Eccentric Reducer

No. 420
Equal Tee

No. 442
Adaptor Nipple

No. 450
Concentric Reducer

No. 451
Eccentric Reducer

grey line 
End Cap      

No. 460
End Cap

 

 

 

Back to Top
grey line 
 
 

Grooved End Accessories:

Mover® Expansion Joint

Expansion Joint

Vic-Strainer® Tee Type

Vic-Strainer® Wye Type

Mover® Expansion Joint

  • Order number: Style 150
  • Slip-type expansion joint
  • Permits easy adjustments prior to installation to accommodate expansion, contraction or both
  • Sizes ranging from 50 to 150mm
  • Pressure rated up to 2 413 kPa

Expansion Joint

  • Order number: Style 155
  • Used as flexible connectors but will not simultaneously provide full expansion and full deflection
  • Joints installed horizontally required independent support to prevent deflection
  • Sizes ranging from 20 to 600 mm
  • Pressure rated up to 2 413 kPa

Vic-Strainer® Tee Type

  • Order number: Style 730
  • Provides straight-through flow for lower pressure drop
  • Installs with two Victaulic couplings
  • Durable 304 stainless steel
  • Sizes ranging from40 to 600 mm
  • Pressure rated up to 5 171 kPa

Vic-Strainer® Wye Type

  • Order number: Style 732
  • Provides straight-through flow for lower pressure drop
  • Installs with two Victaulic couplings
  • Durable 304 stainless steel perforated baskets
  • Sizes ranging from 50 to 600mm
  • Pressure rated up to 2 068 kPa
grey line 
Suction Diffuser   Pipe Preparation Tools  

Suction Diffuser

  • Order number: Style 731
  • Provides optimum flow conditions at the inlet side of the pump
  • Supplied with a removable strainer and a fine mesh sleeve which acts as a start-up strainer
  • Sizes ranging from 76 to 600 mm
  • Pressure rated up to 2 068 kPa

Victaulic® Lubricant

  • Provides efficient pipe joint lubricant

Pipe Preparation Tools

  • We offer a range of pipe preparation tools and accessories, enquire today!

 

Back to Top
grey line 
 
 
 
 

Victaulic products have PROVEN success in the following industries:

  • Mining
  • Maritime
  • Water Treatment
  • Water Distribution
  • Power Generation
  • Original Equipment Manufacturers (OEM)
  • Oil & Gas
  • Automotive
  • Pulp & Paper
  • Heating Ventilation & Air Conditioning (HVAC)
  • Fire protection
  • Chemical & Petrochemical

Victaulic products are available throughout Africa
from Truco. Contact Truco today on 011 762 5291 or fill out the form to optimise your pipe joining systems!

 
Contact Truco for
Victaulic products now
available throughout Africa
     Name *
 
     Company *
 
     Location (Country/Province): *
 
     Email *
 
     Tel *
 
     Products of interest *
 
     Comments *
 
   
 
Image Verification *
captcha
Please enter the text from the image:

[Refresh Image]
 
 
 
  Privacy Policy Legal Notice PAI Act Terms and Conditions of Sale Site Map Contact Us
 
 
           
Hoses Conveyor Belting Additional Products Victaulic Products
Hose Supply Overview
Hose Manufacturers
Hose Pipes
Mining Hoses
Industrial Hoses
PVC Hoses
HDPE Piping
Composite Hoses
Layflat Hoses
Rubber Hoses
High Pressure Hoses
Suction Hoses
Air Hoses
Water Hoses
Fire Hoses
Hose Accessories
Hose Clamps
Couplings
Camlock Couplings
Fuel Hoses
Loading Hoses
Welding Hoses
Chemical Hoses
Pharmaceutical Hoses
 
Conveyor Belts
Textile Reinforced Conveyor Belts
Steel Cord Conveyor Belts
Chevron Rubber Conveyor Belts
Steep Incline Conveyor Belts
Accessories & Service

Rubber Sheeting
 
Rubber Flooring
Rubber Sheeting and Lining Material
CNAF Non-Asbestos Sheeting
Friction Wheels
Rubber Compensators / Bellows
Rubber Extrusions
Flanges
Rubber Adhesives
Marine Fenders and Mooring Systems
Hose Fittings

Resources
 
PDF Downloads
Victaulic Grooved Joining Systems
Victaulic Shouldered Systems
Victaulic HDPE Couplings